|
Ethan's Ark Home |
|
|
| This picture shows the hull, faired and with a yellow epoxy primer. | This picture shows the transom with the rudder tube, and the stern tube in place. The propeller aperture has been faired with epoxy over foam. The small horizontal tube is for cutlass bearing cooling.
|
|
|
| This photo is looking forward with a good view of the faired cabin, deck and cockpit. Notice the bed logs for the after companionway, and the other hatch coamings.
|
This is the transom from the inside showing the after cabin woodwork and the deadwood for the rudder, with the rudder port sitting in place. Still needs to be fit.
|
|
|
| This photo shows the forward cabin with the workbench/bunks. This is looking at the forward bulkhead and you can also see the varnish work and the ribs that will be used for attaching the insulation.
|
This photo is from inside the hull looking aft from the main cabin. It shows some of the interior bright work and the forward companionway.
|
| These pictures were taken in April 2004. There has been a lot done. The hull has been faired and primed. The interior has been varnished (polyurethane). The deck cabin and cockpit have been faired and are waiting on a primer coat. The hatch coamings are mostly complete and the forward area has been set up as a workbench/bunk.
|